E is for Extremely Tricky!

So, we're at the start of another 2 week challenge. And of course we are now at E/F. Same as before - you can make anything you want and use anything you want from your stash - providing at least one thing starts with an E or an F.

I like to take each letter individually and see what I can dig out from my stash, but I have to admit that E was a tricky letter for me. That said, I finally found my inspiration and managed to create my project for this week's inspiration - and Easel card with an Envelobox.

One of the things I found most tricky was trying to find colours. Originally, I was against using Emerald, but in the end I dug through my ink pad collection to see if I could find any inspiration for colours starting with E. And this is what I found - Emerald and Elderberry - Green and Purple - and I actually quite liked it. To be fair, I didn't use the ink pads (except for the sentiment) but it gave me a starting point.

I really wanted to use my e-Brush - an airbrush brought out by Craftwell about 5 years ago that works with Spectrum Noir pens. So I then had to colour match with my pens. I used JG3 (Emerald/Green) and LV2 (Elderberry/Purple). While I was looking through, I also picked out a couple of lighter colours to go with them - LG1 (a pale green) and CR2 (a light pink).

I had a piece of Mylar into which I cut a circle (easier to do if you have multimedia type dies). I used scrap paper to mask off the area around. I started with the LG1 and sprayed the bottom part of the circle, and then CR2 to do the top.

   

I then used a stencil over the top. This one is a mini stencil by Imagination Crafts that was in a Crafter's Inspiration Magazine. It's a double so I wasn't too worried about it being coloured by the ink. And to be fair, it will still work in the same way. So, over the top of the circle and stencil, I sprayed JG3 and LV2.

  

And the result was really quite lovely. 

I also airbrushed a piece of card using the lighter colours to use as a background.

This topper was then used on an easel card. This was cut using Crafter's Companion Circle Easel card die set. The purple mat was Embossed with an old embossing folder from Crafter's Companion - Embossalcious Everday 6x6 Floral Frenzy. The green fancy mat was cut from Core'dinations using the dies that came with the Easel card set.

 

 

For the envelobox, I followed the instructions for a 5.5" x 5.5" card, so started with a 9" square, and scored at G and levels 1 and 2 on each side.

  

 

I decorated the top of the box in the same way as the easel card. I also added some extra mats and layers, and (although not a lot shows) I found a piece of card in my old demo stash that was inked in the right colours (quite by accident) - I am presuming it would have been with Spectrum Noir Harmony Water Reactive Ink in Plum Pudding and Holly Leaf. I used an Edge'able (Jardin) to cut in either side. it just peeks out below the circle.

  

So there it is - my Emerald and Elderberry circle Easel card with Envelobox, with E-Brushed topper,  Embossing and Edge'ables - and a few pearls for Embellishments!!

 

Happy crafting!

Cxxx

When it goes wrong - put a butterfly on...

That old crafter's adage worked for me today - and saved me from feeling pretty rubbish about what I was attempting. This is what I produced, but it is so far from what I set out to do, that it's really quite laughable.

Let's rewind to just before lunch yesterday. I decided to make a list of all the things on my shelves, in my drawers and in my cupboards (and already I know I missed some things - gel press, mica powders...) that I really should play with, have a go with, experiment with. you get the idea.

And when lockdown had seemed imminent a couple of weeks ago, I ordered myself some journals from Pink Pig. The large one has watercolour card in - for an art journal, The next one is lined for jotting ideas and thoughts down. And the little one is for drawing and sketching - I went small with this one as I didn't want to be intimidated by a larger size.

The art journal was the one I wanted to start with, but I didn't really want to ruin other pages, so I cut a piece of mylar to sit behind the page and protect the rest (or that was the idea).

 

For the afternoon's dabble, I decided to have a play with the Spectrum Noir Sparkle Inks. I bought these with the intention of using them on my Christmas cards, and never did, so they have sat in the cupboard for a while.

I got all excited, googled for something different to try with watercolour based products, and found a lovely video clip which showed techniques using salt water, water with bleach, and clingfilm. Great, I thought. And got myself all set up, remembering to take photos for a step by step. And I used some low tack tape to divide the page into three - one for each of the things shown on the clip. So far, so good.

  

I started with the salt water. The idea was to put a wash of the salt water on the paper, then dot the ink on. I used Amethyst and Garnet from the Glitz and Glamour set. This was reasonably successful - but not quite as great as in the video.

I pushed on with the water with bleach in it. Same idea - make a wash with the water and then dot the ink on. This was supposed to give a much more feathery effect. This was what I got. Total fail.

At this point I was starting to get frustrated, but ploughed on with number 3 - the clingfilm. Plain water is put on the clingfilm, ink dotted on, and then applied to the paper. 

  

The result - a puddly mess that leaked onto the other two sides as well. Totally annoyed with myself by this point. Instead of a lovely page showing three techniques, it looked like a small child had been let loose on it (no offence to small children intended). So, I went over the whole lot with the salt water.

  

At this point, it was a case of what can I do to save this. So I dug out my Sara Signature Flutterby Collection (have pretty much all of this as I demo'd it not long after release), Harmony Water Reactive Inks - Plum Pudding, Winter Rose and Silent Night and Chipped Sapphire Distress Oxide.

At this point, photos kind of went by the wayside. I added more of the Pink Garnet Sparkle Ink at the top and bottom and stamped the Botanical Butterfly with Silent Night inkpad. I used water to spread some of the ink, and then filled in with Amethyst and Pink Garnet Sparkle inks. 

Have to say, it looks better on the above photo than I felt it did yesterday, so I watered down some white gesso and went over it to knock it back. And then I attempted to overstamp the butterfly with Memento - Nautical Blue.

    

To frame it, I used one of the Scripture stamps with the Winter Rose inkpad and two different stamps from the Textured Elements set with the Plum Pudding and Silent Night.

The sentiment is from the Fly Away set, and I edged the whole thing (tricky when it's spiral bound) with Chipped Sapphire Distress Oxide.

While this is is no way what I had intended when I started, it ended up OK. Oh, and it's almost impossible to keep the next pages clean in a book like this!! 

Lessons learned. Onwards and upwards!!

Take care and stay safe.

Cxxx

A little something to pass the time.

Today being Sunday, I decided to do something just for me and because I can. Back at Christmas time, I was buying a few bits and pieces and picked this up this little MDF Craft Room Door Hanger from The Wooden Shape Company. It measures roughly 19cm by 8.5cm. It's one of those things that has been rattling around in my stash, just waiting for me to have some time. I have done a step by step for anyone who is interested or really has nothing better to do - but feel free to skip it. This is the finished product:

This is how it came - the hanger and all the pieces. As you can see, I didn't use all the embellishments.

I then had a trawl around to see what I could decorate it with, and decided to go with some Imagination Crafts Rice Paper, left over from another project, and some Starlight Paints.

First step was to gesso both sides of the hanger before applying the rice paper using Imagination Crafts Decoupage Plus Satin.

    

  

I used lots of little scraps of leftover rice paper to cover the back in a similar way.

   

It took me ages to find a layout I liked - and even then didn't follow it completely when I assembled it. And I only used some of the colours of paint that I got out - and a couple of the Imagination Crafts Art Stamps.

   

I used the stamps with Distress Oxide, building up some layers with Antique Linen, Tea Dye and Vintage Photo.

    

More texture was added using Imagination Crafts Baby Bubbles Stencil and Shabby Chic Texture Paste in Linen. When this was dry, I went over with more Vintage Photo Distress Oxide.

       

The MDF embellishments were painted with Topaz, Antique Gold, Clotted Cream and Salmon Starlight paints and attached with hot glue. I finished it off - as I always seem to do - with some flat backed pearls and ribbon.

Stay safe and take care,

Cxxx